Without moonroof: Disconnect the connectors (A), and detach the harness clips (B) from the driver's side A-pillar.
NOTE: The positions and number of connectors vary depending on models.
2.
Disconnect the connectors (A), and detach the harness clips (B) from the passenger's side A-pillar.
NOTE: The positions and number of connectors vary depending on models.
3.
At the right quarter pillar, disconnect the connectors (A), and detach the connector clips (B) and the harness clip (C).
Without moonroof
With moonroof
4.
Slide the front seats all the way back, and recline the seat-back fully.
5.
Fold down the rear seats.
6.
With the help of an assistant, lower the headliner.
7.
With the help of an assistant, remove the headliner (A) through the tailgate opening.
NOTE: Do not bend the headliner. Bending the headliner will crease and damage it.
15.
Grab Handle Bracket - Remove
Front
Rear
1.
If necessary, remove the bolts (A, B).
2.
Detach the hooks (C), then remove the grab handle bracket (D).
16.
Headliner Cushion Tape - Remove
1.
If necessary, remove the cushion tapes.
17.
Headliner - Check
Without moonroof
With moonroof
1.
If the side curtain airbag has deployed, replace the headliner (A), along with the other parts listed for side curtain airbag deployment.
2.
To prevent the side curtain airbags from deploying improperly and possibly causing injury, inspect the headliner and all removed trim. Replace any pieces with the following damage:
Any creases or tears in the headliner
Any damages around the grab handle holes (B) or the sunvisor holes (C) in the headliner
Any fastener bases (D), the clip bases (E), and the magnet (F) which have come off the headliner
18.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
