Cargo Area Light Removal, Installation, and Test
1. Cargo Area Light - Remove
1.
Turn the cargo area light switch OFF.
2.
Carefully pry off the lens (A).
3.
Remove the cargo area light (B).
4.
Disconnect the connector.
5.
Remove the bulb.

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

1. Cargo Area Light - Test
NOTE: When doing the cargo area light test, make sure to install the bulb correctly.
1.
Check for continuity between the terminals in each switch position according to the table.
2.
If the continuity is not as specified, replace the bulb.
3.
If the continuity is still not as specified, replace the cargo area light (A).