Console Accessory Power Socket Circuit Troubleshooting
Console Accessory Power Socket Circuit Troubleshooting
1.
Problem verification:

Problem verification
?1.
Test the console accessory power socket.

Does the console accessory power socket work?

     
YES
     
     
     
Intermittent failure, the system is OK at this time. Check for loose or poor connections.?
     
NO
     
     
     
Go to step 2.
2.
Fuse check:

Fuse check
?1.
Check the following fuses.
Fuse
No. A2-3 (60 A)
Location
Under-hood fuse/relay box

Fuse
No. B12 (20 A)
No. B19 (7.5 A)
Location
Under-dash fuse/relay box

Is each fuse OK?

     
YES
     
     
     
Go to step 3.
     
NO
     
     
     
Replace the fuse. If the fuse blows again, repair a short to ground in the No. A2-3 (60 A), No. B12 (20 A), and/or No. B19 (7.5 A) fuse circuit(s).?
3.
Console accessory power socket relay check:

Console accessory power socket relay check
?1.
Remove the console accessory power socket relay from the under-dash relay holder A, and test it.

Is the relay OK?

     
YES
     
     
     
Go to step 4.
     
NO
     
     
     
Replace the console accessory power socket relay, then recheck.?
4.
Open wire check (+B F/BOX MAIN2 line):

Open wire check (+B F/BOX MAIN2 line)
?1.
Measure the voltage between test points 1 and 2.
Test condition
Vehicle OFF (LOCK) mode
Console accessory power socket relay: disconnected
Test point 1
Test point 2
Body ground

Is there battery voltage?

     
YES
     
     
     
Go to step 5.
     
NO
     
     
     
Repair an open or high resistance in the wire.?
5.
Open wire check (+B ACC SOCKET (CONSOLE) line) 1:

Open wire check (+B ACC SOCKET (CONSOLE) line) 1
?1.
Measure the voltage between test points 1 and 2.
Test condition
Vehicle OFF (LOCK) mode
Console accessory power socket relay: disconnected
Test point 1
Under-dash fuse/relay box connector S (10P) No. 7
Test point 2
Body ground


Is there battery voltage?

     
YES
     
     
     
Go to step 6.
     
NO
     
     
     
6.
Open wire check (+B ACC SOCKET (CONSOLE) line) 2:

Open wire check (+B ACC SOCKET (CONSOLE) line) 2
?1.
Measure the voltage between test points 1 and 2.
Test condition
Vehicle OFF (LOCK) mode
Console accessory power socket relay: disconnected
Test point 1
Console accessory power socket relay 4P socket No. 5
Test point 2
Body ground


Is there battery voltage?

     
YES
     
     
     
Go to step 7.
     
NO
     
     
     
Repair an open or high resistance in the wire.?
7.
Determine possible failure area (console accessory power socket relay switch side circuit, console accessory power socket relay coil side circuit):

Determine possible failure area (console accessory power socket relay switch side circuit, console accessory power socket relay coil side circuit)
?1.
Connect terminals A and B with a jumper wire.
Terminal A
Console accessory power socket relay 4P socket No. 5
Terminal B
Console accessory power socket relay 4P socket No. 6


Does the console accessory power socket work?

     
YES
     
     
     
Go to step 8.
     
NO
     
     
     
Go to step 11.
8.
Open wire check (ACC MAIN line):

Open wire check (ACC MAIN line)
?1.
Turn the vehicle to the ACCESSORY mode.

?2.
Measure the voltage between test points 1 and 2.
Test condition
Vehicle ACCESSORY mode
Console accessory power socket relay: disconnected
Console accessory power socket relay 4P socket No. 5 and No. 6: jumped
Test point 1
Under-dash fuse/relay box connector A (5P) No. 5
Test point 2
Body ground


Is there battery voltage?

     
YES
     
     
     
Go to step 9.
     
NO
     
     
     
Repair an open or high resistance in the wire.?
9.
Open wire check (ACC line) 1:

Open wire check (ACC line) 1
?1.
Measure the voltage between test points 1 and 2.
Test condition
Vehicle ACCESSORY mode
Console accessory power socket relay: disconnected
Console accessory power socket relay 4P socket No. 5 and No. 6: jumped
Test point 1
Under-dash fuse/relay box connector Q (16P) No. 7
Test point 2
Body ground


Is there battery voltage?

     
YES
     
     
     
Go to step 10.
     
NO
     
     
     
10.
Open wire check (ACC line) 2:

Open wire check (ACC line) 2
?1.
Measure the voltage between test points 1 and 2.
Test condition
Vehicle ACCESSORY mode
Console accessory power socket relay: disconnected
Console accessory power socket relay 4P socket No. 5 and No. 6: jumped
Test point 1
Console accessory power socket relay 4P socket No. 7
Test point 2
Body ground


Is there battery voltage?

     
YES
     
     
     
Repair an open or high resistance in the ground wire or poor ground (G501).?
     
NO
     
     
     
Repair an open or high resistance in the wire.?
11.
Open wire check (CTR ACC SOCKET line):

Open wire check (CTR ACC SOCKET line)
?1.

?2.
Measure the voltage between test points 1 and 2.
Test condition
Vehicle OFF (LOCK) mode
Console accessory power socket relay: disconnected
Console accessory power socket relay 4P socket No. 5 and No. 6: jumped
Test point 1
Console accessory power socket 2P connector No. 2
Test point 2
Body ground


Is there battery voltage?

     
YES
     
     
     
Go to step 12.
     
NO
     
     
     
Repair an open or high resistance in the wire.?
12.
Open wire check (GND line):

Open wire check (GND line)
?1.
Check for continuity between test points 1 and 2.
Test condition
Vehicle OFF (LOCK) mode
Console accessory power socket relay: disconnected
Console accessory power socket relay 4P socket No. 5 and No. 6: jumped
Test point 1
Console accessory power socket 2P connector No. 1
Test point 2
Body ground


Is there continuity?

     
YES
     
     
     
     
NO
     
     
     
Repair an open or high resistance in the ground wire or poor ground (G503).?