CR-V RM1/RM4,RE5/RE6 year 2012-2016
Twitter
Facebook
Snapchat
Instagram
Medium
Ball Joint Boot Replacement and Inspection
Special Tools Required
Image
Description/Tool Number
Bearing Driver Attachment, 40 mm 07GAF-SE00200
1.
Ball Joint Boot - Inspect
1.
Check the ball joint boot for weakness, damage, cracks, and grease leaks.
NOTE:
If the ball joint boot is damaged with grease leaks,
replace the lower arm ball joint
.
If the ball joint boot is soft and cracked without grease leaks, replace the lower arm ball joint boot.
1.
Vehicle - Lift
2.
Front Wheel - Remove
3.
Lower Arm Ball Joint - Remove
4.
Ball Joint Boot - Remove
5.
Ball Joint Boot - Install
1.
Pack the interior and lip (A) of a new boot with grease.
NOTE:
Keep the grease off of the boot-to-lower ball joint housing mating surfaces (B).
Use the grease that comes with the ball joint kit, or multi-purpose grease.
Do not let dirt or other foreign materials get into the boot.
2.
Pack fresh grease into the base (C).
3.
Install the ball joint boot.
4.
Squeeze it gently to force out any air.
5.
Wipe the grease off the tapered portion of the ball joint pin (D).
6.
Press the boot with the bearing driver attachment until the bottom seats (A) on the lower ball joint housing all the way around.
7.
Wipe any grease off the exposed portion of the ball joint pin.
6.
Lower Arm Ball Joint - Install
7.
Front Wheel - Install
Menu
Homepage
HONDA
CR-V 2012
Privacy Policy
About Us
Terms of Use
Contact Us
SERVICE MANUALS