Remove the windshield/rear window washer motor (A).
NOTE: Fluid may flow out of the opening.
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
1.
Windshield/Rear Window Washer Motor - Test
1.
Disconnect the connector.
2.
Check the washer motor operation by connecting 12 volt battery power and ground according to the table.
If the washer motor does not run or fails to run smoothly, replace the windshield/rear window washer motor (A).
If the washer motor runs smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer hose, or a clogged washer motor outlet.
