Front Individual Map Light Removal, Installation, and Test
1. Front Individual Map Light - Remove

Without Moonroof

With Moonroof
1.
Turn the front individual map light switch OFF.
2.
Carefully pry off the lenses (A).
3.
Remove the front individual map light (B).
4.
Disconnect the connectors.
5.
Remove the bulbs.

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

1. Front Individual Map Light - Test

Without Moonroof

With Moonroof
NOTE: When doing the front individual map light test, make sure to install the bulbs correctly.
1.
Check for continuity between the terminals in each switch position according to the table.
2.
If the continuity is not as specified, replace the bulb(s).
3.
If the continuity is still not as specified, replace the front individual map light (A).