Moonroof Glass Position Adjustment
1. Moonroof Glass Position - Check
1.
The roof panel (A) should be even with the glass weatherstrip (B) to within 0?1/?1 mm (0?0.04/?0.04 in) all the way around. If not, make the following adjustment.

3. Moonroof Glass Position - Adjust
NOTE: If necessary, repeat this procedure on the opposite side.
1.
Slightly loosen the bolts (A) with a TORX T25 bit.
2.
Move the glass (B) up or down.
3.
Tighten all bolts securely.