CR-V RM1/RM4,RE5/RE6 year 2012-2016
Twitter
Facebook
Snapchat
Instagram
Medium
Dashboard/Steering Hanger Beam Disassembly and Reassembly
SRS components are located in this area. Review the
SRS component locations
and the
precautions and procedures
before doing repairs or service.
1.
Both Inner Vents - Remove
2.
Audio Unit - Remove (With Audio Unit)
3.
Audio-Navigation Unit - Remove (With Audio-Navigation Unit)
4.
Center Display Visor - Remove
5.
Multi-Information Display Unit - Remove
6.
GPS Antenna - Remove (With Audio-Navigation Unit)
7.
Sunlight Sensor - Remove (For Some Models)
8.
Gauge Control Module - Remove
9.
Passenger's Dashboard Trim Panel - Remove
10.
Climate Control Unit - Remove (With Auto A/C)
11.
HVAC Control Unit - Remove (With Manual A/C)
12.
Both Outer Vents - Remove
13.
Front Passenger's Airbag - Remove
14.
Glove Box Striker - Remove
15.
Steering Hanger Beam - Remove
1.
Remove the bolts (A).
2.
Remove the screws (A).
Left side
Right side
3.
Detach the harness clip(s) (A).
4.
Detach the harness clip (A).
5.
With climate control: Disconnect the connector (A).
6.
Remove the dashboard (A).
16.
Center Joint Duct - Remove
1.
If necessary, remove the screw (A), and detach the harness clips (B).
2.
Remove the center joint duct (C).
17.
Glove Box Cover - Remove
Left side
Right side
1.
If necessary, remove the glove box covers (A).
18.
Knee Pad - Remove
1.
If necessary, remove the knee pads (A).
19.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
Menu
Homepage
HONDA
CR-V 2012
Privacy Policy
About Us
Terms of Use
Contact Us
SERVICE MANUALS