|
Rear Differential System Description - 4WD System
Overview
The dual pump system (DPS) has a real-time control mechanism that allows most of the driving force to go to the front wheels and transmits an appropriate driving force from the front wheels to the rear wheels when needed. The rear differential assembly has an integrated oil-bath clutch and differential mechanism inside and a light and compact cam mechanism. The DPS controls the front wheels and rear wheels differently depending on the difference between the rotational speeds of the wheels. When the speed difference is small, the one-way cam is working to minimize the need for the pump to produce hydraulic pressure. When the speed difference is large, hydraulic pressure develops in the two pumps. By controlling the engagement of the main clutch, driving force transmitted to the rear wheels is optimized according to the driving conditions. This system switches to 2-wheel drive (2WD) or 4-wheel drive (4WD) automatically so the driver does not have to select these modes manually. The DPS has a limiter switch to prevent transmission of excessive torque to the rear wheels. For the differential fluid, DPSF-II is used exclusively. One-way Cam Operation
The one-way cam unit consists of two cams (front wheel and rear wheel) and balls between the two cams which detects the difference in the front and rear wheel speeds. When a difference of the front and rear wheel speeds develops, the difference in the rotational speed of the two cams also develops, and the front cam rotational speed exceeds that of the rear cam. When this happens, the balls move along the cam groove, pushes and widens the cams, and applies pressure to the main clutch. When the speed difference becomes greater, the dual pump system (DPS) operates. Since the cam unit is a one-way type, it only operates when driving forward. NORMAL DRIVING
CAM UNIT OPERATION
CAM UNIT OPERATION
Dual Pump System (DPS) Operation
For non-slippery roads (no slipping): DPS not operating
When the front and the rear wheel speeds are equal (no slipping) as from normal driving, the oil discharged in the front pump and the oil drawn in the rear pump are equal, so the hydraulic pressure that pushes the wet-type multi-plate clutch is not developed, and the rear wheels are not driven. In addition, the clutch drum and the clutch hub are not contacted completely, but linked each other with a maximum of 80% of contacting rate. This slippage reduces the friction caused by a rotating difference between the front and rear. For slippery roads (with slipping): DPS operating
When the front wheel speed is more than the rear wheel speed such as in starting, acceleration, and driving on a slippery road surface, the amount of oil discharged by the front pump exceeds the oil drawn by the rear pump, thus producing hydraulic pressure that engages the wet-type multi-plate clutch, and transmits driving force to the rear wheels. When the speed of the front wheels becomes even greater than the rear wheels, the torque limiter mechanism (relief valve) limits the hydraulic pressure that engages the wet-type multi-plate clutch, and transmits only the necessary driving force to the rear wheels as needed by 4WD driving. In addition, the clutch drum and the clutch hub are not contacted completely, but linked each other with a maximum of 80% of contacting rate. This slippage reduces the friction caused by a rotating difference between the front and rear. Rear Differential Assembly
The rear differential assembly consists of the torque control differential (TCD) that controls the 4WD mechanism and the rear differential mechanism section. Torque control differential (TCD)
The TCD consists of the TCD case, the differential assembly, the clutch, the one-way cam, and the oil pump body assembly. Differential clutch assembly
The differential clutch assembly is composed of the clutch guide, clutch disc A/B, the clutch hub, the pressure plate, and also the one-way cam, the pilot clutch assembly, and other parts. The clutch guide gets the front wheel driving force from the propeller shaft, while the clutch hub meshes with the hypoid drive pinion gear, and follows the speed of the rear wheels. One-way cam
The one-way cam consists of the base cam that spins with the clutch guide via the pilot clutch, the apply cam that meshes with the clutch hub, and the steel balls that are sandwiched by the two cams. The base cam rotates at front wheel speed and the apply cam rotates at rear wheel speed. When speed difference develops, the steel balls move along the grooves in the base cam, and by the shape of the grooves, pushes the apply cam outwards. Pump body assembly
The pump body assembly consists of the front oil pump, the rear oil pump, and the rear oil pump cover, all with a built-in hydraulic circuit. The front oil pump is driven by the pressure plate component. The rear oil pump is driven by the hypoid drive pinion gear. The front and rear are both trochoidal pumps. By design, the rear oil pump capacity is set 2.5 % higher than the front oil pump capacity, this is to compensate for the speed difference caused by wear in the front tires, as well as for tight corner braking. Differential carrier
This is composed of the hypoid drive pinion gear, the hypoid ring gear, the differential housing, and other parts. Power Transmission
During 2WD driving (DPS not in operation)
In addition, the clutch drum and the clutch hub are not contacted completely, but linked each other with a maximum of 80% of contacting rate. This slippage reduces the friction caused by a rotating difference between the front and rear. During 4WD driving (DPS operation)
The front wheel driving force from the propeller shaft is transmitted to the clutch guide and the clutch plate. When the oneway cam operates, the clutch plate and the clutch disc become connected, and from the clutch hub, the driving force is transmitted to the pinion gear, the ring gear, the differential, the rear driveshafts, and to the rear wheels. Hydraulic Circuit
Construction of the hydraulic circuit
Built inside the oil pump assembly, the hydraulic circuit provides clutch assembly lubrication together with 4WD control. The hydraulic circuit consists of the front and rear oil pumps, the front valve and five check valves for hydraulic route switching, the choke section which is the hydraulic path to the clutch piston compartment, and the two orifices that controls the hydraulic pressure in the piston compartment. The hydraulic circuit is equipped with a system protection function with a wax-pellet-style thermal switch and relief valve.
Operation of the hydraulic pressure circuit
Operation of the emergency hydraulic pressure circuit
Thermal switch operation
When the relief valve is in operation
|