Remove the drain plug (A), and drain the transmission fluid.
NOTE: Remove metal particles from the magnetic surface of the drain plug.
2.
Reinstall the drain plug with a new sealing washer (B).
NOTE: Do not reuse the old sealing washer.
4.
Transmission Fluid Pan - Remove
1.
Remove the transmission fluid pan (A).
NOTE: When you remove the oil pan, you must be careful about the transmission fluid (HCF-2) capacity for filling the transmission. Compared to the specified capacity, the actual transmission fluid (HCF-2) capacity can be increased by the elapsed time after removing the oil pan.
2.
Remove the dowel pins (B).
3.
Remove the gasket (C).
4.
Clean the transmission magnet assembly.
NOTE:
Check the transmission magnet assembly for damage or dirt. If it is damaged or dirty, replace it.
When you remove the transmission magnet assembly, replace it with new magnets.
NOTE: Keep all foreign particles out of the transmission.
1.
Transmission Magnet Assembly - Install
NOTE: When you remove the transmission magnet assembly, replace it with new magnets.
2.
Transmission Fluid Pan - Install
1.
Install the transmission fluid pan (A) with the dowel pins (B) and a new gasket (C), and tighten them in a crisscross pattern in at least two steps.
NOTE:
Do not pinch the solenoid wire harnesses.
When you remove the oil pan, you must be careful about the transmission fluid (HCF-2) capacity for filling the transmission. Compared to the specified capacity, the actual transmission fluid (HCF-2) capacity can be increased by the elapsed time after removing the oil pan.
