Headlights become very hot during use; do not touch them or any attaching hardware immediately after they have been turned off.
Before adjusting the headlights:
Park the vehicle on a level surface.
Make sure the tire pressures are correct.
The driver or someone who weighs the same should sit in the driver's seat (or use an equivalent weight).
Unload the vehicle.
1.
Clean the outer lens so that you can see the center (A) of the headlights.
2.
Park the vehicle so that the center mark of the headlight (A) is 24.6 ft (7.5 m) away from a wall or screen (B).
3.
Measure the height of the headlight's center mark (A), then on the wall or screen (B), mark the same height of the headlights with masking tape in a straight horizontal line (C).
4.
Turn on the low beam headlights.
5.
Determine if the headlights are aimed properly.
6.
Vertical adjustment:
?1.
Measure the height of the headlights (A).
?2.
Adjust the upper edge of the cut line (B) to the headlights' height.
7.
If adjustment is necessary, open the hood and adjust the headlights to local requirements by turning the adjusters (A).
