Release the straps (A) from the seat cushion frame springs (B), then pull back the undercover (C).
Driver's seat - With DPMS
Driver's seat - With 8 way power seat
Driver's seat - With manual height adjustable seat
Passenger's seat - Without subwoofer
Passenger's seat - With subwoofer
2.
Disconnect the connector (A), and detach the connector clip(s) (B).
3.
With power seat: Disconnect the connectors (C).
4.
With DPMS: Disconnect the connectors (D).
5.
With seat heater: Disconnect the connector(s) (E), and detach the connector clip (F).
6.
With seat position sensor: Disconnect the connector (G).
7.
Detach the harness clips (H).
8.
Pry up the hooks (J) of the harness holders (K), then release them from the seat cushion frame springs (L).
9.
Release the hook strip (A).
10.
Unzip the seat-back cover (B).
11.
Detach the hook and loop fasteners (A).
12.
Release the hook strips (B), and loosen the seat-back cover (C).
13.
Detach the harness clip (A).
14.
Pull out the harness (B) through the holes (C) in the seat-back cover (D).
15.
Release airbag attachment wires A and B from the seat-back frame (C).
16.
Release the hook strips (A) from the seat-back frame (B).
4.
Head Restraint Guides - Remove
5.
Front Seat-Back Cover/Pad - Remove
6.
Front Seat-Back Cover - Remove
1.
Remove airbag attachment wires A and B.
2.
Remove the upholstery rings (A), then remove the front seat-back cover (B).
7.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE:
Reinstall airbag attachment wires A and B securely to the front seat-back frame (C) as shown.
Replace all of the upholstery rings (D) fastening the seat-back (E) to the pad wires (F) with new ones using commercially available upholstery ring pliers (G).
