Interior Trim Removal and Installation - Rear Side Area
2. Rear Damper Maintenance Cover - Remove
1.
Fold down the rear seat-back.
2.
Remove the rear damper maintenance cover (A).

3. Rear Carpet Trim - Remove

Left side

Right side
1.
Tuck up the rear seat-back cover (A).




Left side

Right side
2.
Remove the rear carpet trim (A).

4. Rear Seat Cushion Foot Cover - Remove

Left side

Right side
1.
Remove the rear seat cushion foot cover (A).

5. Rear Seat Belt Lower Anchor Bolt - Remove

6. Rear Side Trim Panel - Remove
1.
Pry out on the upper hook (A) in the rear seat release lever cap (B) with the trim tool, then remove the rear seat release lever cap.
2.
Remove the screws (C).
3.
Remove the trunk hook (A).
4.
Remove the tie-down hook (A).
5.
Remove the clips (A, B).
6.
Pull out the rear side trim panel (C) to detach the clips (D, E).
7.
Remove the rear seat release lever (A).
8.
Detach the rear seat release cable (A) from the clips (B) of the rear side trim panel (C), then remove the rear side trim panel.

7. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: Align the marks (A) on the rear seat release cable (B) with the clip (C) as shown.